SioGreen

SioGreen IR8000 Infrared Electric Tankless Water Heater. WholeHouse. 18 kW@220v,80 amps Coilless Technology using Quartz. No Corrosion and No Maintenance.

Style:9. IR8000 80amps/18kW/220v
IR8000 18kW/80A. Infrared Electric Tankless Water Heater.


The Infrared Tankless Water Heater - Model IR8000 is the high-range model for Residential and Commercial use, ideal for large family homes or medium to large businesses, with a capacity of 0.5 to 4.6 gallons per minute depends on each region inlet cold water and PSI. This powerful, efficient water heater applies Quartz Infrared heating elements and a tankless design for maximum performance and efficiency. A traditional water heater has metal heating elements that are placed in the tank where the water is stored. Eventually, these metal parts begin to corrode and break down inside the tank, leading to a loss of efficiency, system failure, and possibly even water contaminants like bacteria and algae. SuperGreen’s Infrared Tankless design does not experience these problems, making it up to sixty percent (60%) more efficient and up to twice as long-lasting as many conventional designs. Use 3 steps below to sizing your house.
The Infrared Tankless Water Heater - Model IR8000 can even be used to efficiently upgrade an existing traditional unit because it is also designed for HYBRID applications. IR QUARZT’s tankless units can be integrated into an existing conventional electric or gas tank water heater, providing all the benefits of tankless water heating - energy savings and continuous hot water on-demand. The super-efficient Quartz Infrared heating elements heat the water quickly and then store the hot water in the traditional unit’s tank, this means you never run out hot water.
Metal Elements vs Quartz Elements


All water heaters rely on a heating element of some description; generally, this is in the form of hot metal components.

When metal elements are implemented into an on-demand boiler the biggest problem is that only the water in direct contact or the immediate vicinity is heated; this can reduce flow rates considerably to achieve hot water.

Infrared works at a molecular level and IR Quartz Coilless Technology is the only hot water generator in the world to take advantage of this.

​​
Save Energy with PID Modulate Technology


Existing electric water heater strategies focus on on/off control of water heater, where a group of heaters is disabled during certain periods of time using a direct load control strategy. When water heaters are energized, they are either on consuming a fixed amount of power, i.e., 4.5 kW or they are off.
Fuzzy logic control is a simple control strategy which works well for control of certain class of nonlinear systems that contain variables with uncertainty, where the power consumed by the water heater can be controlled based on the information available from the water heater such as water temperature, maximum and minimum water temperatures allowed (or desired) and distribution level power demand, flow rate, base on that status above variables, the fuzzy controller will determine the percentage of allowable power that the water heater should consumer.
3 Steps How to Determine the FlowRate IR8000


1) Find the average cold incoming water temperature in your region.
2) Difference region has difference flowrate base on 107F output.
3) Insure 10 Years Elements/ 3 Years on Electric Components Parts. You must register the product online within 30 days of purchase to obtain a insure.
SG-IR8000

Availability: In stock

$940.00
$688.99

Details

Style:9. IR8000 80amps/18kW/220v IR8000 18kW/80A. Infrared Electric Tankless Water Heater. The Infrared Tankless Water Heater - Model IR8000 is the high-range model for Residential and Commercial use, ideal for large family homes or medium to large businesses, with a capacity of 0.5 to 4.6 gallons per minute depends on each region inlet cold water and PSI. This powerful, efficient water heater applies Quartz Infrared heating elements and a tankless design for maximum performance and efficiency. A traditional water heater has metal heating elements that are placed in the tank where the water is stored. Eventually, these metal parts begin to corrode and break down inside the tank, leading to a loss of efficiency, system failure, and possibly even water contaminants like bacteria and algae. SuperGreen’s Infrared Tankless design does not experience these problems, making it up to sixty percent (60%) more efficient and up to twice as long-lasting as many conventional designs. Use 3 steps below to sizing your house. The Infrared Tankless Water Heater - Model IR8000 can even be used to efficiently upgrade an existing traditional unit because it is also designed for HYBRID applications. IR QUARZT’s tankless units can be integrated into an existing conventional electric or gas tank water heater, providing all the benefits of tankless water heating - energy savings and continuous hot water on-demand. The super-efficient Quartz Infrared heating elements heat the water quickly and then store the hot water in the traditional unit’s tank, this means you never run out hot water.

Additional Information

Brand SioGreen

Write Your Own Review

You're reviewing: SioGreen IR8000 Infrared Electric Tankless Water Heater. WholeHouse. 18 kW@220v,80 amps Coilless Technology using Quartz. No Corrosion and No Maintenance.

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Quality